Moving: The operator manually moves the vehicle to the pallet position by pushing or pulling the handle.
Lifting: After inserting the pallet, the operator presses the "Raise" button on the handle. The electric motor drives the hydraulic pump station, pumping hydraulic oil into the lifting cylinder, thus lifting the mast and forks to raise the goods.
Lowering: Pressing the "Lower" button opens the control valve. Under the weight of the goods, the hydraulic oil slowly flows back, and the forks smoothly lower.
Handling and Stacking: After lifting the goods to the required height (usually for lifting off the ground or low-level stacking), the vehicle is manually moved to the target location, and then the forks are lowered to complete the operation.
